Switchmode Technology Gel Cell / Lead Acid Chargers

Medical and Information Technology Gel Cell/Lead Acid Float Mode Battery Chargers Provide optimum battery life in standby applications. Will maintain fully charged battery at constant voltage. Used typically in the event of power failure or when charger is connected to battery during discharge. Can be used as a power supply and charger combination Automatic Dual Mode Battery Chargers Will rapidly recharge batteries without danger of overcharge. Should be used when batteries are repeatedly being discharged and recharged. Standard Specifications Input: 90-264 Vac 50/60 Hz Operating Temperatures: 0-40°C Output Voltage Tolerance: +/- 1% Short Circuit & Overload Protection Designed for Continuous Duty Wall Plug-in or Desktop Configurations All designs are approved or meet UL, CSA, TUV & CE requirements 3 Year Warranty Available Features On-Off Power Switch Temperature Compensated Charging Voltage DC input for DC to DC Operation LED's Indicating Power On and or High Charge Output Cord Sets and Connector Configurations Open Frame Construction (without enclosure) Auxiliary Power Supply Output Safety Compliance       Designed to:                UL 60601-1, 60950-1                  CSA 22.2 #601.1, #60950                 EN 60601.1, 60950.1 & CE ISO 9001 Registered

Float Mode Enclosure/Power Code (3rd and 4th model # digits) "L1" "L2" "L3" "Z1" "Z2" "X2" "X3" Enclosure Power Rating for 12V cell voltage 15W 21W 30W 48W 67W 96W 135W Model # Cells Nominal Battery Volts Float Charge Volts Charge Current / Amps WF**06* 3 6V 6.9V 2.2 2.8 3.6 6.0 8.4 12 15 WF**08* 4 8V 9.2V 1.6 2.2  3.0 4.8 6.7 9.6 13 WF**10* 5 10V 11.5V 1.3 1.8  2.4 4.0 6.4 8.0 11 WF**12* 6 12V 13.8V 1.1 1.5 2.2 3.5 5.0 7.0 9.8 WF**16* 8 16V 18.4V 0.81 1.2  1.6 2.6 3.6  5.2 7.3 WF**18* 9 18V 20.7V 0.72 1.0  1.4 2.3 3.2  4.6 6.5 WF**24* 12 24V 27.6V 0.55 0.75  1.1 1.75 2.5  3.5 5.0 WF**30* 15 30V 34.5V --- --- --- --- --- 2.8 3.9 WF**36* 18 36V 41.4V --- --- --- --- --- 2.4 3.3 WF**48* 24 48V 55.2V --- --- --- --- --- 1.75  2.5 Automatic Dual Mode Enclosure/Power Code (3rd and 4th model # digits) "L1" "L2" "L3" "Z1" "Z2" "X2" "X3" Enclosure Power Rating for 12V cell voltage 15W 21W 30W 48W 67W 96W 135W Model # Cells Float Charge Volts High Charge Volts Charge Current / Amps WD**06* 3 6.9V 7.35V 1.7 2.4 3.4 5.6 7.8 11 15 WD**08* 4 9.2V 9.8V 1.4 2.0 2.8 4.4 6.2 8.8 13 WD**10* 5 11.5V 12.25V 1.2 1.6 2.3 3.8 5.3 7.6 11 WD**12* 6 13.8V 14.7V 1.0 1.4 2.0 3.2 4.5 6.4 9.2 WD**16* 8 18.4V 19.6V 0.75 1.0 1.5 2.5 3.5 5.0 7.0 WD**18* 9 20.7V 22.05V 0.70 1.0 1.3 2.3 3.2 4.6 6.5 WD**24* 12 27.6V 29.4V 0.50 0.70 1.0 1.6 2.3 3.2 4.5 WD**30* 15 34.5V 36.75V --- --- --- --- --- 2.6 3.7 WD**36* 18 41.4V 44.1V --- --- --- --- --- 2.2 3.1 WD**48* 24 55.2V 59.2V --- --- --- --- --- 1.6 2.3 PART NUMBERING SYSTEM 1 2 3 4 5 6 7 Pos 1 & 2: From Model # in Tables Pos 3 & 4: From Enclosure/Power Code at top of Tables Pos 5 & 6: From Model # in Tables Pos 7: An "M" in this position indicates a Medical model, additionally the following suffixes are used for L enclosure wall plug-in configurations (the Z and the X enclosure is not available as a wall plug-in.)    "N": North American, Nema 5-15P    "E": European, CEE7/16    "U": United Kingdom, BS1363    "A": Australian, AS3112 Example: WDL112M Dual Mode, L1 Enclosure/Power Code, 12V Battery, Medical Use