WSX100/200/300 FAMILY SWITCHMODE POWER SUPPLY SPECIFICATIONS

Specifications:

1. General Character:
The model WSX series power supplies are designed for use in medical, information technology or laboratory  environments. They provide a "universal"  AC input operation, and can supply 0 to approximately 100W of stable DC output power. Fan cooling is provided to allow higher power densities than is possible without fan cooling.

1.1 The model number suffix "M", indicates that a specific model is for use in a medical environment.

2. Electrical Specifications:

2.1 Input: 100-250Vac     50/60Hz     250VA
(90-264 Vac, 47-63 Hz is the tested operational range, 100-250 Vac range is marked on product to comply with safety standards.)

2.1.1 Input Fuses:
A current fuse is incorporated in each of the 2 AC lines, rated at 3.5A, 250V, slo blo type fuse element, 2AG size, configured with integral welded on leads. Available from Littlefuse, part number 230-3.5.

2.1.2 Input Switch:
An optional input switch may be provided if required. A "I" and a "O" will be marked on it, or next to it.

2.2 Output:   ( Optional suffix letter "M", indicates medical usage. )

Single Output Models
 

WSX150  WSX155  WSX160  WSX165  WSX170  WSX175  WSX180  WSX190  WSX110  WSX111  WSX112  WSX113  WSX114  WSX115

5.0Vdc 16A 5.5Vdc 14.6A  6.0Vdc 13.4A 6.5Vdc 12.4A 7.0Vdc 11.4A 7.5Vdc 10.6A 8.0Vdc 10A 9.0Vdc 9.6A 10Vdc 8.6A 11Vdc 8.0A 12Vdc 8.3A 13Vdc 7.7A  14Vdc 7.1A 15Vdc 6.7A

WSX116  WSX118  WSX120  WSX122  WSX124  WSX126  WSX128  WSX130  WSX132  WSX136  WSX140  WSX144  WSX148

16Vdc 6.3A 18Vdc 5.6A 20Vdc 5.0A 22Vdc 4.5A 24Vdc 4.2A 26Vdc 3.8A 28Vdc 3.6A 30Vdc 3.4A 32Vdc 3.2A 36Vdc 2.8A 40Vdc 2.6A 44Vdc 2.4A 48Vdc 2.2A

Multi Output Models  ( "W" indicates a maximum available combined output power . )

WSX201 WSX202 WSX203 WSX204 WSX205 WSX206 WSX207 WSX208 WSX209 WSX210

+12Vdc 7A +15Vdc 6A +20Vdc 4.5A +24Vdc 4A +5Vdc   12A +5Vdc   12A +5Vdc   12A +5Vdc   12A +5Vdc   12A +12Vdc 7A

-12Vdc 4A -15Vdc 3.2A -20Vdc 2.4A -24Vdc 2A -5Vdc   4A +12Vdc 5A +15Vdc 4A +20Vdc 3A +24Vdc 2.5A +18Vdc 3.3A

96W 96W 96W 96W 80W 90W 90W 90W 90W 96W

WSX301	+5Vdc   12A	+12Vdc 3A	-12Vdc 2A	90W
WSX302	+5Vdc   12A	+15Vdc 2.5A	-15Vdc 1.5A	90W

2.3 Output Variance, Voltage:
+/- 5% at Full Load, any input voltage or environmental condition

2.4 Load Regulation, Voltage:
Not to exceed 600 millivolts for 100% to 0% load change, varies due to output cord selected, remote sense option available, contact factory.

2.5 Protection Circuitry: The output is protected from short circuit and prolonged overload. The internal circuitry is protected against a locked fan condition.

3. Mechanical Specifications:

3.1 Enclosure Dimensions: 6.5"L X 3.75"W X 2.56"H inches, enclosure outline drawings available upon request.

3.2 Input Configuration: Male IEC320, 3 conductor, power inlet.

3.3 Output Configuration:   6 foot length standard, various conductor arrangements and jacket material selections are available. Cordsets may be terminated with various dc connectors, custom output connector assemblies are available, contact customer service for details. Standard in-stock cordsets can be seen in the Jerome Industries engineering manual / catalog on pages 10 and 11.

4. Environmental:
 

4.1 Operating : Temperature: 0 to 40C  Humidity: 10% to 95% non-condensing Atmospheric pressure: 70 to 106 kPa

Please contact customer service if a wider operating range is required.

4.2 Storage :

Temperature: -40 to 75C
Humidity: 10% to 95% non-condensing
Atmosperic pressure: 50 to 106 kPa

4.3 Liquid Ingress:

Spill-proof per IEC60601-1 clause 44.3, vertical drip proof per IEC60529.

4.4 Ingress Protection Level: IPX1

4.5 Audible noise:
52 dBA maximum white noise measured 12 inches from any side. Virtually no detectable narrowband sound apparent.

4.6 Fan:
Fan will operate at normal speed from 100% load to approximately (25 to 40)% load.
From no load to approximately (25 to 40)% load fan is stopped.

5. Regulatory Compliance

5.1 Safety Compliance:
These power supplies have been certified by the following safety agencies to the standards shown:
 
5.1.1 Single Output Models
These power supplies have been certified by the following safety agencies to the standards shown:

Regulatory Agency UL     UL testing and  evaluation of  Canadian  requirements. CSA       TUV

Standard UL60601-1 UL544  UL60950-1  C22.2#601-1 C22.2#125  C22.2#60950-1 C22.2#601-1 C22.2#125  C22.2#60950-1 EN60601-1 EN60950-1

Classification Isolation, BF Patient Care, Grounded SELV Isolation, BF Risk Class 2G SELV Isolation, BF Risk Class 2G SELV  Isolation, BF SELV

File# E160908 E160908 E148586 E160908 E160908 E148586 LR58275 LR58275 LR58275

5.1.2 Multi Output Models
These power supplies have been certified by the following safety agencies to the standards shown:
 

Regulatory Agency UL

Standard UL60601-1 UL544

Classification Isolation, BF Patient Care, Grounded

File# E160908 E160908

5.2 Power supplies shipped to European market need to bear the CE mark. Jerome Industries can supply a CE mark under the following standards:
 

Standard EN60601-1 EN60950

Classification Isolation, BF SELV

5.3 Electro Magnetic Compatibility:
Meets requirements of European EMC directive and FCC requirements.

5.3.1 Medical:
Meets EMC requirements from EN60601-1-2 (EMC requirements for ElectroMedical Equipment).

5.3.2 Emissions:
Meets level B requirements of FCC 47 CFR part 15 and CISPR11 (EN55011) and CISPR22 (EN55022), EN61000-6-3 (light industrial) and line harmonic emissions EN61000-3-2.

5.3.3 Immunity:
Meets CISPR24 (EN55024), EN61326 and EN61000-6-1.

5.3.4 EMC Responsibility:
It is the responsibility of the OEM customer to verify EMC compliance with his system before marketing the end-use system.
 

 Notes:

1) Emissions are monitored on all prototypes using a spectrum analyzer with peak, quasi peak and average mode power measurement capabilities. Conducted emissions are recorded for both 120 Vac and 230 Vac input conditions. A correlated radiated emissions program is used in order to economically verify the radiated emissions from a specific model.
The emissions program works from the premises of the power supply acting as a dipole antenna radiator, one side of the dipole antenna being the input cord, the other side being the output cord. Levels are monitored on the cords by a common mode current sensing device operating into a spectrum analyzer. Correlation factors have been established which are based upon the difference between radiated field measurements made at independent labs and Jerome Industries lab common mode current measurements on the cords of reference power supplies.
Using this technique, Jerome Industries has experienced a 100% passing rate for prototypes submitted for radiated field emissions testing at independent labs.

OEM System Engineer Instructions

*  The EMC characteristics of the final system comprised of both the power supply and the main system must be evaluated to the applicable EMC environment regulations.

*  Should a power supply need repair, please return it along with a note describing the particular problem to:

  Jerome Industries Inc.
  730 Division St.
  Elizabeth, NJ 07201
  U.S.A.

*  Circuit operation block diagrams, isolation diagrams, and a list of safety critical components will be available on request to appropriately qualified personnel.

* All products which contain externally replaceable double input fuses shall contain the following text in the system installation manual: "CAUTION: DOUBLE POLE/NEUTRAL FUSING"

Medical Products

*  When used with medical products the Instruction Manual prepared for the end use product must incorporate at a minimum, the following power supply warning notices:
 

 a) Warning: When cleaning the power unit, use a cloth dampened with cleaning alcohol on the outside   of the enclosure only. Do not immerse product in water or a safety hazard could arise during use.
 b) Warning: Do not use this power unit in the presence of flammable anesthetics.
 

*  Periodic leakage current testing should be done on the combined power supply and end-use system on a yearly basis when used in a hospital environment where such test equipment is commonly available.

Appendix A
WSX100 Family Leakage Current
Measurements per IEC60601-1 Clause 19

Notes:
1) Measurement data in microamps
2) Measurements made with 275 Vac, 60 Hz input.
3) Worst case measurement condition, including humidity preconditioning.
4) Reduced leakage designs available (including CF category compliant designs), contact factory for availability.