Switchmode Technology
- Provide optimum battery life in standby applications.
- Will maintain fully charged battery at constant voltage. Used typically in the event of power failure or when charger is connected to battery during discharge.
- Can be used as a power supply and charger combination
Gel Cell/Lead Acid Float Mode Battery Chargers
- Will rapidly recharge batteries without danger of overcharge.
- Should be used when batteries are repeatedly being discharged and recharged.
Automatic Dual Mode Battery Chargers
- Input: 90-264 Vac 50/60 Hz
- Operating Temperatures: 0-40°C
- Output Voltage Tolerance: +/- 1%
- Short Circuit & Overload Protection
- Designed for Continuous Duty
- Wall Plug-in or Desktop Configurations
- All designs are approved or meet UL, CSA, TUV & CE requirements
- 5 Year Warranty
Standard Specifications
- On-Off Power Switch
- Temperature Compensated Charging Voltage
- DC input for DC to DC Operation
- LED's Indicating Power On and or High Charge
- Output Cord Sets and Connector Configurations
- Open Frame Construction (without enclosure)
- Auxiliary Power Supply Output
Available Features
Regulatory Compliance
Designed to:
UL 60601-1, 60950-1
CSA 22.2 #601.1, #60950
EN 60601.1, 60950.1 & CE
* cUL Mark
| Float Mode | ||||||||||
| Enclosure/Power Code (3rd and 4th model # digits) | "L1" | "L2" | "L3" | "Z1" | "Z2" | "X2" | "X3" | |||
| Enclosure Power Rating for 12V cell voltage | 15W | 21W | 30W | 48W | 67W | 96W | 135W | |||
| Model # | Cells | Nominal Battery Volts | Float Charge Volts | Charge Current / Amps | ||||||
| WF**06* | 3 | 6V | 6.9V | 2.2 | 2.8 | 3.6 | 6 | 8.4 | 12 | 15 |
| WF**08* | 4 | 8V | 9.2V | 1.6 | 2.2 | 3 | 4.8 | 6.7 | 9.6 | 13 |
| WF**10* | 5 | 10V | 11.5V | 1.3 | 1.8 | 2.4 | 4 | 6.4 | 8 | 11 |
| WF**12* | 6 | 12V | 13.8V | 1.1 | 1.5 | 2.2 | 3.5 | 5 | 7 | 9.8 |
| WF**16* | 8 | 16V | 18.4V | 0.81 | 1.2 | 1.6 | 2.6 | 3.6 | 5.2 | 7.3 |
| WF**18* | 9 | 18V | 20.7V | 0.72 | 1.0 | 1.4 | 2.3 | 3.2 | 4.6 | 6.5 |
| WF**24* | 12 | 24V | 27.6V | 0.55 | 0.75 | 1.1 | 1.75 | 2.5 | 3.5 | 5 |
| WF**30* | 15 | 30V | 34.5V | --- | --- | --- | 1.4 | 2.0- | 2.8 | 3.9 |
| WF**36* | 18 | 36V | 41.4V | --- | --- | --- | 1.2 | 1.6 | 2.4 | 3.3 |
| WF**48* | 24 | 48V | 55.2V | --- | --- | --- | 0.9 | 1.2 | 1.75 | 2.5 |
| Automatic Dual Mode | ||||||||||
Enclosure/Power Code (3rd and 4th model # digits) |
"L1" | "L2" | "L3" | "Z1" | "Z2" | "X2" | "X3" | |||
Enclosure Power Rating for 12V cell voltage |
15W | 21W | 30W | 48W | 67W | 96W | 135W | |||
| Model # | Cells | Float Charge Volts | High Charge Volts | Charge Current / Amps | ||||||
| WD**06* | 3 | 6.9V | 7.35V | 1.7 | 2.4 | 3.4 | 5.6 | 7.8 | 11 | 15 |
| WD**08* | 4 | 9.2V | 9.8V | 1.4 | 2 | 2.8 | 4.4 | 6.2 | 8.8 | 13 |
| WD**10* | 5 | 11.5V | 12.25V | 1.2 | 1.6 | 2.3 | 3.8 | 5.3 | 7.6 | 11 |
| WD**12* | 6 | 13.8V | 14.7V | 1 | 1.4 | 2 | 3.2 | 4.5 | 6.4 | 9.2 |
| WD**16* | 8 | 18.4V | 19.6V | 0.75 | 1 | 1.5 | 2.5 | 3.5 | 5 | 7 |
| WD**18* | 9 | 20.7V | 22.05V | 0.7 | 1 | 1.3 | 2.3 | 3.2 | 4.6 | 6.5 |
| WD**24* | 12 | 27.6V | 29.4V | 0.5 | 0.7 | 1 | 1.6 | 2.3 | 3.2 | 4.5 |
| WD**30* | 15 | 34.5V | 36.75V | --- | --- | --- | 1.3 | 1.8 | 2.6 | 3.7 |
| WD**36* | 18 | 41.4V | 44.1V | --- | --- | --- | 1.1 | 1.5 | 2.2 | 3.1 |
| WD**48* | 24 | 55.2V | 59.2V | --- | --- | --- | 0.8 | 1.1 | 1.6 | 2.3 |
PART NUMBERING SYSTEM
Example:
WDL112M
1 2 3 4 5 6 7
Pos 1 & 2: From Model # in Tables
Pos 3 & 4: From Enclosure/Power Code at top of Tables
Pos 5 & 6: From Model # in Tables
Pos 7: An "M" in this position indicates a Medical model, additionally the following suffixes are used for L enclosure wall plug-in configurations (the Z and the X enclosure is not available as a wall plug-in.)
"N": North American, Nema 5-15P
"E": European, CEE7/16
"U": United Kingdom, BS1363
"A": Australian, AS3112
Dual Mode, L1 Enclosure/Power Code, 12V Battery, Medical Use
| International Energy Efficiency Performance Key to above Table | |||
|---|---|---|---|
| Color | International EPS Efficiency Marking Protocol Category | USA/CEC DOE EISA 2007 |
Aus/NZ and China Compliance |
| Light Green | Efficiency Level 4 or 5 | Yes | Yes |
| Light Blue | Efficiency Level 2 or 3 (not recommended for new designs) |
No | No |
| Energy Performance Regulations | |||
Jerome Industries manufactures external power supplies (also called power adapters) for the international industrial and medical markets. Product offerings include wall plug-in and desktop style power adaptors, medical grade power supplies, battery charger power sources, open frame switchmode power supplies, battery chargers, transformers, linearmode power sources, switchmode power sources, unregulated power supplies, NiCad chargers, NiMH chargers, gel cell chargers, low leakage switching power supplies, military grade power supplies and custom power supplies. Energy Star certified external power supplies now available.
Copyright © 2010, Jerome Industries Corporation. All rights reserved.